Method to change your car’s motor oil

Before you begin doing such a thing, you must ask yourself a few questions that will answer all

your queries to help you while changing motor oil of your car. Regular changing of your car’s

engine oil and its filter is one of the most important tasks you will have to execute from time to

time, to keep your car running well. Motor oil must be changed depending on the driving habits

and frequency of it. There are basically 3 major steps to changing the motor oil. The first step

would be to empty the old oil. Second step would include replacing the oil filter with a new one

and the third step would be to add the new oil.

Here are some basic questions that you should ask before considering changing the motor oil,

including when to change or how frequently one must change the oil, what type of oil to use, and

what are the necessary precautions and steps that should be taken care of or performed to change

the motor oil.

One must change oil after 6000 miles of normal and 3000 miles of heavy service. This keeps the

engine well and running like new. You could also change car oil after the initial 300 mile mark

of the break in period and then continue changing after 6000 miles hereon after.

Let’s talk about what kind of oil to be used as your motor oil. You could use any brand motor oil,

while changing your motor oil, but it is usually recommended that using branded oil is far better

than using off-branded oil. This way there is lesser chance of wear and tear or wearing off.

Pennzoil and Valvoline are some of the premier brands of motor oil that can be used in as your

motor oil. They last long and also helps function better without any breakups while driving.

Such branded motor oil may cost you, but they last longer and perform better. Use the weight oil

SAE 10W30, if you are going to change motor oil before the winter months. This way your car

will remain safe and prepared for the winter months ahead. The engine will start quicker and

smoother with a 10-weight viscosity. Finally it will thicken to 30-weight viscosity that helps the

engine to warm up quicker during the winter months.

Here are the three steps to drain and change your old motor oil. Draining the old oil is the

primary step. Find the oil-drain plug and put a container beneath it to catch the oil. After that the

oil plug must be removed. Once the oil has stopped draining, the drain plug must be reinstalled

again. Turn it clock wise in order to drain replace your drain plug.

Replacing the oil filter is the next step. Removing the oil can and the oil filters. Put some oil with

your finger on the filter to tighten the seal. Finally feed your motor with new oil. Replace the

filter cap and start the engine for a quick check. See how smooth it runs.